Brands, retailers, wholesalers and designers build every category here in 925 sterling silver with AAA cubic zirconia or moissanite. Start from our design library at 25 pieces per style, or send your drawing for OEM and ODM from 100 pieces. 3D drawings in 1-3 days, samples in 7-15 days, bulk in 25-40.
Six ring constructions run through the workshop on a regular basis, all in 925 sterling silver with AAA cubic zirconia or moissanite. Any of them can be lifted from the design library, or drawn up from your sketch, photo or stone list.
A single AAA cubic zirconia or moissanite held in a prong or bezel setting, on a band profile of your choosing. Stone size and band width are fixed before sampling.
Plain, hammered and pavé-set bands in 925 sterling silver, offered in fine and wide profiles. Band width and shank thickness are agreed before sampling.
Flat-faced signet rings in 925 sterling silver, with the face left plain, engraved or set with stones. Face shape and height follow your drawing. Engraving is available on custom designs.
Narrow bands drawn to sit together, produced as single styles so several can be worn on one finger.
Large-face statement rings in 925 sterling silver with pavé or relief surfaces, built around a centre stone or a full motif. Face size is confirmed on the 3D drawing before sampling.
Open-shank rings in 925 sterling silver that move across a size range, useful when one style has to serve several markets. The opening range is agreed before sampling.
Every ring below began as an in-house drawing and can carry your own label. The same motif is cut in line, pavé and relief, so one silhouette can be listed at three different price points.
These are the questions that come up while a ring programme is still on paper. Each answer states what actually happens on our side.
| The question | The answer from our side |
|---|---|
| The sample ring comes back in the wrong size | Ring size is agreed in writing before a sample is cut, and the confirmed size is the one the production run follows. |
| Several sizes needed in one order | A 25-piece style order can combine up to three sizes in one line. For more than three sizes, or for a fully custom drawing, size and quantity are agreed case by case. |
| Adjustable shanks opening up over time | Adjustable shanks are formed in 925 sterling silver, and the opening range is agreed before the sample is made. |
| Stones dropping out of prong or pavé settings | Prongs and claws are closed over each stone and checked piece by piece at the setting stage. |
| Cost per ring drifting with silver weight | Silver weight per piece is quoted before sampling starts, so the price per ring is tied to an agreed weight. |
| The bulk finish looks nothing like the sample | Finishing and stone setting are inspected against the approved sample before packing. |
| The band arrives thinner or heavier than drawn | Band width and shank thickness are agreed before sampling, not changed after the order is placed. |
| Packing has to carry our own branding | Custom packaging starts at 10,000 pieces. Standard orders are packed in OPP bags. |
Band width, stone height and how a ring sits against the finger are settled before sampling begins. Model images below show band proportion and how the stacked sets read together.
Pick a ring from the design library, or send a drawing, a photo and the stone you want to set.
The 3D drawing and the price per ring, based on the agreed silver weight, come back within 1-3 days.
A sample ring is produced in 7-15 days in the size you confirmed, with 3-5 sample pieces available.
Bulk production takes 25-40 days, then a second inspection runs before worldwide shipping.
The numbers below are what our workshop works to on 925 sterling silver rings, not indicative ranges.
| Material | 925 sterling silver with AAA cubic zirconia or moissanite |
|---|---|
| Minimum order | 25 pieces per style from the design library; 100 pieces per style for your own OEM or ODM design; 120 pieces per style in 18K gold plating |
| Order structure | One style per order; up to three sizes combined in a 25-piece run |
| Sizing | Ring size confirmed in writing before sampling; adjustable shanks and comfort-fit inner contour available on request |
| Sampling | Single-piece sampling supported; 3-5 sample pieces available |
| 3D drawing | 1-3 days |
| Sample lead time | 7-15 days |
| Bulk lead time | 25-40 days |
| Plating | 0.1-0.3 micron standard; other thicknesses available on request |
| Stone setting | Prong, bezel, pavé and channel settings |
| Compliance | Test reports available: SGS, REACH, RoHS, ASTM, CE |
| Design protection | Confidentiality agreement on request, after a personalized design is cleared for production |
| Logo | Engraving available on custom ring designs |
| Packing | OPP bags as standard; custom-branded packing from 10,000 pieces |
| Order model | Rings are cut after you order, from 25 pieces per style. No ready stock is held |
| Production | 1,500+ sqm facility, 70+ team members, 5 production lines, 14 production steps |
| Shipping | A second inspection runs here, then worldwide shipping from our Guangzhou warehouse |
25 pieces per style when you take a silhouette from the design library. Your own OEM or ODM design starts at 100 pieces per style, and 18K gold-plated versions start at 120 pieces per style. A 25-piece style order can combine up to three sizes.
Yes. A single 25-piece style order can combine up to three ring sizes in one line. For a fully custom OEM or ODM drawing, size and quantity terms are agreed case by case.
Yes. Open-shank adjustable rings are produced in 925 sterling silver, and the opening range is agreed before the sample is made so the ring holds its shape in wear.
Yes. We support single-piece sampling and can make 3-5 sample pieces. The sample takes 7-15 days once the 3D drawing is signed off; the drawing itself takes 1-3 days.
Yes. Ring bodies are cast in 925 sterling silver and set with AAA cubic zirconia or moissanite. Plating is held at 0.1-0.3 micron as standard; other thicknesses are available on request, and SGS, REACH, RoHS, ASTM and CE test reports are available.
No. Rings only leave the workshop against a confirmed order, from 25 pieces per style. Nothing is stocked in advance and there is no off-the-shelf catalogue, so brands, retailers and wholesalers all run custom production with us.
Earrings and necklaces run through the same workshop, so a ring motif can be carried across a whole collection.
Six earring constructions, produced from 25 pieces per style.
View Custom Silver Earrings
Pendants, line necklaces and chain styles developed to your specification.
View Custom Silver Necklaces
Solitaire, band, signet, stackable, cocktail and adjustable rings in one programme.
Browse All ProductsSend a drawing, a photo or a stone list and we will confirm whether it can be made before you commit to a size or a quantity.
+00 86-13411058700
