Brands, retailers, wholesalers and designers build every category here in 925 sterling silver with AAA cubic zirconia or moissanite. Start from our design library at 25 pieces per style, or send your drawing for OEM and ODM from 100 pieces. 3D drawings in 1-3 days, samples in 7-15 days, bulk in 25-40.
Hengdian Silver supplies 925 sterling silver necklace lines to brands, retailers, wholesalers, content creators and designers. A library pendant opens at 25 pieces per style, while your own drawing drives an OEM or ODM run from 100 pieces. Chain length is locked from your brief before a sample is cut.
Standard chain length runs 40-45 cm and is adjusted to your requirement rather than drawn from a fixed set. An extender chain can be added when one style needs to suit more than one fit.
Six necklace builds pass through the workshop in 925 sterling silver with AAA cubic zirconia or moissanite. Each one comes from the library or is built to your sketch, photo and stone reference.
A centred pendant on a 40-45 cm chain, carrying a line, pavé or relief motif. Pendant size and chain weight are agreed before sampling.
Short collars at 35-40 cm that sit at the base of the neck, drawn around a single pendant or a row of stones.
Evenly spaced stones along the chain, set at a spacing you specify so the piece reads as a running line of light.
A Y-drop that lengthens past the chain, finished with an adjustable tie or a second pendant for a longer silhouette.
Two or three chains of different lengths worn together, produced as one programme so the layers sit without tangling.
Cable, box, snake, curb, rope and wheat chains supplied on request, matched to the pendant weight and finish.
Each pendant shown started as an in-house ocean sketch and takes your own label. A single creature reads across line, pavé and relief, giving three price points from one drawing.
The questions below arrive while a necklace programme is still on the drawing board. Every reply describes the steps we take on our end.
| The question | The answer from our side |
|---|---|
| The pendant sits too high or too low | Chain length is confirmed from your specification before sampling, and the production run holds to that length. |
| Several lengths needed in one order | Standard length runs 40-45 cm and is adjusted to your requirement; an extender is added rather than mixing fixed lengths in one line. |
| Chains tangling in layered sets | Layered sets are produced as one programme with spaced lengths, so the chains sit together without tangling. |
| Stones catching on clothing | Stones are secured in their settings and verified one by one at the setting bench. |
| Cost per piece drifting with silver weight | Silver weight per piece is quoted before sampling, so the price follows the agreed weight. |
| The bulk finish looks nothing like the sample | Finishing and stone work are checked against the signed sample before packing. |
| The pendant tips forward when worn | Pendant bail and centre of balance are agreed on the 3D drawing before sampling begins. |
| Packing has to carry our own branding | Custom packing begins at 10,000 pieces; standard orders ship in OPP bags. |
Pendant drop, chain weight and the way a necklace lies on the collarbone are agreed before sampling. The model shots below show the fall and how layers read as a set.
Take a necklace from the library, or send a drawing with a photo and a stone reference to set.
The 3D drawing and the per-piece price, fixed on the agreed silver weight, return within 1-3 days.
A sample comes in 7-15 days at the chain length you set, and 3-5 pieces can be made.
Bulk runs take 25-40 days, then a second check runs before worldwide dispatch.
The figures below are the standards our workshop holds on 925 sterling silver necklaces, not rough estimates.
| Material | 925 sterling silver, set with AAA cubic zirconia or moissanite stones |
|---|---|
| Minimum order | 25 pieces per style taken from the library; 100 pieces per style for a bespoke OEM or ODM drawing; 120 pieces per style with 18K gold plating |
| Order structure | One style per order; chain length from your specification |
| Length | 40-45 cm standard, adjusted to your requirement; extender chain available |
| Sampling | Sampling from a single piece is supported; 3-5 sample pieces can be made |
| 3D drawing | 1-3 days |
| Sample lead time | 7-15 days |
| Bulk lead time | 25-40 days |
| Plating | 0.1-0.3 micron as standard, with other thicknesses offered on request |
| Stone setting | Bezel, prong, pavé and channel stone settings |
| Compliance | Reports on hand: SGS, REACH, RoHS, ASTM, CE |
| Design protection | NDA available on request once a custom design is cleared to produce |
| Logo | Logo engraving offered on custom necklace designs |
| Packing | Standard OPP bags; branded packing from 10,000 pieces |
| Order model | Necklaces are made to order from 25 pieces per style; we hold no ready stock |
| Production | 1,500+ sqm plant, 70+ staff, 5 lines, 14 steps |
| Shipping | A second check is done here, then worldwide dispatch from our Guangzhou warehouse |
A library pendant starts at 25 pieces per style. A bespoke OEM or ODM drawing begins at 100 pieces per style, and 18K gold-plated builds at 120 pieces. Length is set from your brief before sampling.
Yes. Standard length runs 40-45 cm and is adjusted to your requirement. An extender chain is added when one style needs to suit more than one fit, rather than mixing fixed lengths in a single line.
Yes. Two or three chains of different lengths are produced as one programme, with the lengths spaced so the layers sit together without tangling.
Yes. Sampling from one piece is supported and 3-5 pieces can be made. The sample needs 7-15 days after the 3D drawing is signed off, and the drawing itself takes 1-3 days.
Yes. Pendants are cast in 925 sterling silver and set with AAA cubic zirconia or moissanite. Plating holds at 0.1-0.3 micron as standard, other thicknesses on request; SGS, REACH, RoHS, ASTM and CE reports are on hand.
No. Necklaces leave the workshop only once an order is confirmed, from 25 pieces per style. We stock nothing ahead and keep no off-the-shelf list, so retailers, brands and wholesalers all make custom with us.
Earrings and rings share one workshop, so a necklace motif can spread across a whole collection.
All six ring builds — solitaire, band, signet, stackable, cocktail, adjustable — in one programme.
View Custom Silver Rings
Pendants, chokers, station, Y-lariat and layered sets in one workshop.
Browse All ProductsSend a drawing with a photo or stone list and we check whether it is makeable before you fix a length or quantity.
+00 86-13411058700
